Products tagged with 'Hi-Vis'

Designed for visibility, this durable heavyweight hoodie is also warm and comfortable.. 8.6-ounce, 100% polyester smooth-faced fleece. Black bottom front and cuffs for a cleaner appearance. Durable, reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility on body and sleeves. Three-panel hood with drawcord closure. Taped neck. Front pouch pockets. Molded center front zippered closure. Rib knit cuffs and hem. This garment must be fully zipped to be in compliance with ANSI 107 standards CSF300

Wear it as a layer. Wear it by itself. Wear it with pride. It's as rugged and dependable as your favorite hammer.. Durable 6.75-ounce, 100% cotton jersey knit. 90/10 cotton/poly (Heather Grey). 60/40 cotton/poly (Carbon Heather). Rib knit crewneck and cuffs. Tagless neck label. Left chest pocket. Side-seamed construction minimizes twisting. Carhartt label sewn on left chest pocket. Loose fit CTK126

Carhartt's bestselling, no-quit, original work shirt. A classic for 25 years.. Durable 6.75-ounce, 100% cotton jersey knit. 90/10 cotton/poly (Heather Grey). 60/40 cotton/poly (Other Heathers, Brite Lime, Brite Orange). Rib knit crewneck. Tagless neck label. Left chest pocket. Side-seamed construction minimizes twisting. Carhartt label sewn on left chest pocket. Loose fit CTK87

Sometimes Mother Nature can't make up her mind. This sweatshirt works perfectly as a layer or by itself, allowing you to adapt with the weather.. 10.5-ounce, 50/50 cotton/poly blend. 70/30 cotton/poly blend (Heather Grey). Attached three-piece hood with drawcord closure. Front hand warmer pocket. Stretchable, spandex-reinforced, rib knit cuffs and waistband. Carhartt-strong, triple-stitched main seams. Carhartt label sewn on hand warmer pocket. Loose fit

Nothing is better for relaxing than our 9-ounce favorite at a budget-friendly price.. 9-ounce, 50/50 cotton/poly fleece. Air jet yarn for softness. Front pouch pockets. Due to the nature of 50/50 cotton/polyester neon fabrics, special care must be taken throughout the printing process.

Stay safer on the jobsite in this high-visibility t-shirt that works as hard as you do.. ANSI/ISEA 107 Class 2 certified. 5.9-ounce, 100% polyester interlock. Wicks moisture. 2-in. wide reflective taping on front and back. Left chest pocket for pens and notes CS401

Carhartt's Midweight Hooded Zip-Front Sweatshirt brings considerable comfort to cool-weather worksites.. 10.5-ounce, 50/50 cotton/poly blend or 59/41 cotton/poly blend (Black, Carbon Heather, Moss, New Navy)*. 50/50 cotton/poly blend (Brite Lime, Brite Orange). 70/30 cotton/poly blend (Heather Grey). Attached three-piece hood with drawcord closure. Full-length brass front zipper. Two front hand warmer pockets. Stretchable, spandex-reinforced, rib knit cuffs and waistband. Carhartt-strong, triple-stitching on pocket. Carhartt label sewn on left hand warmer pocket. Loose fit. *Please note: Select colors in Carhartt fleece are currently transitioning from a 50/50 cotton/poly blend to a 59/41 cotton/poly blend. Weight and fabric properties remain the same. Your order may contain a combination of both fabrics.

Enhanced visibility joins moisture-wicking performance in this layerable worksite basic.. 5.5-ounce, 100% polyester smooth-faced fleece. Moisture-wicking. Black bottom front and lower sleeves for a cleaner appearance. Three-panel hood with drawcord adjustable closure. Taped neck. Front pouch pocket. Rib knit cuffs and hem CSF01

100% polyester 300-denier ripstop shell with durable water-repellent (DWR) finish. 100% polyester lining. Black bottom front and lower sleeves for a cleaner appearance. Shell's fabric waterproof rating: 5000MM. Fully seam-sealed shell. Adjustable rain hood. Durable, reflective 2-inch tape meets ANSI 107 requirements. Full-length interior and exterior storm flaps. Vented cape back. Right chest pocket and retractable ID holder. Two lower front pockets. Center front zippered pocket to hold a tablet. Gusseted cuffs. Elastic hem. Port Pocket in shell for easy embroidery access. Non-ANSI, 8.6-ounce, 100% polyester inner full-zip hoodie. Hoodie can be attached inside shell. This garment must be fully zipped to be in compliance with ANSI 107 standards CSJ502

This non-ANSI certified beanie features 3M reflective yarn for superior reflective capability.. Fabric: 100% acrylic CS800

We took our popular knit cap style and fully lined it with fleece for additional warmth and comfort.. Fabric 100% acrylic with 100% polyester fleece lining. 68/32 poly/acrylic (Athletic Oxford)

This cap has reflective taping in the sandwich, top of bill, back crown and closure.. Fabric: 100% fluorescent polyester. Structure: Lightly structured. Profile: Low. Closure: Hook and loop C836